Increased productivity
MOVITRANS® offers maximum system reliability and is wear-free and maintenance-free
Easy to configure
With its individual system components, MOVITRANS® can be easily adapted to suit changing system tasks and modifications
Cut costs
MOVITRANS® increases system availability and minimizes maintenance requirements in the long term
Do your systems span lengthy distances? Meaning that you need to transport your goods at high speed? Do you want to avoid contamination caused by energy transfer in contamination-sensitive areas?
Then MOVITRANS® is the perfect power supply system for you. It operates on the principle of inductive energy transfer. Electrical energy is transferred from a fixed conductor to one or more mobile consumers without contact. Time-consuming, cumbersome drag-chain systems have become a thing of the past.
The electromagnetic connection is made via an air gap and is maintenance-free and wear-free. This contactless energy supply enables high speeds of more than 10 m/s. And as line cables are routed under the floor, there are no longer any obstacles disrupting transverse traffic.
Another major advantage: this type of power supply is emission-free and resistant to contamination. The system does not produce any noise emissions either. All of this contributes significantly to higher productivity levels, as maintenance and installation are more efficient.
Achieve cost efficiencies thanks to our lean, compelling system design, from simple track segmentation to flexible track design with curves and points. Fast, easy assembly also cuts costs, as only two cables have to be routed along the travel distance.
The use of the MOVITOOLS® engineering software means that starting up and using the technology is extremely simple.
By activating the zip code search, data is transferred to the USA by Google. For more information, see our privacy policy.
MOVITRANS® je sestavljen iz stacionarnih in mobilnih sistemskih komponent. Te se lahko enostavno in hitro integrirajo v obstoječe avtomatizacijske sisteme.
Če so omrežni vodniki položeni na tleh ali v tleh, se uporablja ploščata transformatorska enota. Zračna reža med omrežnim vodnikom in transformatorsko enoto lahko znaša do 20 mm. Zato je visoka prenosna moč mogoča tudi v primerih, ko transformatorska enota ni vodena v konstantni razdalji nad omrežnim vodnikom.
U-oblikovane transformatorske enote so potrebne, kadar je na voljo le omejen prostor za vgradnjo ali kadar želi upravljavec obstoječi sistem tokovnih vodnikov nadomestiti z brezkontaktnim prenosom električne energije. Pri tem se omrežni vodniki vedno položi v profilni sistem za prenos energije. Ker transformatorska enota »obdaja« vodnik, lahko glede na svojo kompaktno velikost doseže zelo visoko prenosno moč. Zračna reža med omrežnimi vodniki in transformatorsko enoto znaša približno 10 mm na vseh straneh.
Krmilni element napajanja TPS
vklopni modul TAS
Priključna omarica TVS
Kompenzacijska enota TCS
Srednjefrekvenčni kabel TLS za polaganje v zemljo
Inštalacijski elementi za vodene napeljave TIS
Ploščata transformatorska enota THM10E
U-oblikovana transformatorska enota THM10C
Prilagoditveni pretvornik TPM12B
Priključni kabel (hibridni kabel) za odgon TPM12B